PocketWizard MiniTT1-Nikon Specifications

aQuick Guide for Nikon340.00 – 354.00 MHz, US FCC/IC433.42 – 434.42 MHz, CEMAKE IT POSSIBLE™ UPDATE FIRMWARE: Be sure ALL your PocketWizard ControlTL®

ExposureSpeedlight Flash Control = Normal i-TTL Non-TTL Flash Control = Auto ISO and Aperture Tracking Non-TTL Exposure Compensation Value (f-stops) =

aSpecicationsSpecicationsTrigger Delay: = 0 seconds – “faster than a wire” when using compatible Nikon cameras,approximately 900 microseconds in Bas

© 2010 LPA Design, Inc. All rights reserved. Product features and specications are subject to change without notice. PocketWizard, ControlTL, MiniTT1

This PocketWizard radio runs on powerful software called ControlTL (Control The Light). It can be configured for your specific needs using the PocketW

aPocketWizard recommends powering your Speedlights with high-capacity rechargeable batteries. If operation is not optimal, check Speedlight and radio

Basic Wireless CLS / i-TTL: MiniTT1 FlexTT5No ash on Camera1. Slide MiniTT1 Transmitter onto camera.2. Slide Speedlight onto remote FlexTT5 Tran

aAdvanced Wireless CLS / i-TTL: MiniTT1 FlexTT5Flash on Camera1. Slide MiniTT1 Transmitter onto camera.2. Slide Nikon SB-800 or SB-900 Speedlight

MiniTT1 Plus II, MultiMAX, Integrated, or FlexTT5connected to manual ashRemote ash with or without CLS / i-TTL ash on camera1. Slide MiniTT1

aManual FlashChannels can be set via PocketWizard Utility (recommended) or taught from any PocketWizard transmitter using Learn Mode. Learn Mode is no

Auto-Relay ModeA FlexTT5 radio in camera’s shoe and connected with motor drive cord to P1 can receivea radio trigger and trigger the camera’s motor dr

aOther Functions ResetRESETRESET A / CHANNEL RESET:To reset learned channels to channels last set in Utility, hold TEST on power up. LED blinks green